info

You have reached the minimum number

Shopping cart (0)

There are no products in your shopping cart yet.

Adhesives



Loading...
Araldite 2029-1

Quick view

Order

Araldite 2029-1

€ 25,11
(0)
In stock
Araldite 2029-1

Araldite 2029-1

(0)
€ 25,11

Araldite® 2029-1 is a two component gap filling polyurethane adhesive, consisting of a grey resin component and a beige-coloured

Araldite 2029-1 is a gap-filling polyurethane adhesive with average processing time that is highly resistant to dynamic loads. This glue has a good connection with metal, copper and brass. Araldite 2029-1 is an extremely suitable adhesive for structural solutions.
 
Applicable for:
  • Composites and metal
  • Thermoplastics
  • Adhesion to copper and brass
 
Characteristics:
Colour: Anthracite
Gap filling up to 4mm
Specific weight: 1,32 g/cm³
Shear strength: 24 N/mm²
Peel strength: 3.1 N/mm²
Viscosity: 60.000 mPa.s.
Temperature resistance: -40°C tot +80°C
Processing time: 40 minutes
Minimal curing time before applying initial  strength: 4 hours for 1 N/mm² at 23°C
Water resistance
Excellent chemical resistance
 

2031 araldite epoxy adhesive-double injection

Quick view

Order

(0)
In stock
2031 araldite epoxy adhesive-double injection

2031 araldite epoxy adhesive-double injection

(0)
€ 30,77

The Araldite 2031 is a black epoxy glue - two components

Suitable for:

  • Fibreglass reinforced plastics
  • Fiberglass reinforced epoxies
  • Fibre-reinforced polyester
  • Thermosetting composites
 

Properties:

  • High chemical resistance 
  • Gap filling capacity till 10 mm
  • Color: black
  • 1,3 g/cm³
  • Shear strength in combination with carbon: 8 N/mm²
  • Peel strength: 4 N/mm
  • Viscosity: thixotropic
  • Temperature resistance: -50°C till +80°C
  • Minimal hardening time for initial strength: 6 hours for 1 N/mm² at 23°C 

Mixing tubes M50DS

Quick view

Order

Mixing tubes M50DS

€ 20,00
(0)
In stock
Mixing tubes M50DS

Mixing tubes M50DS

(0)
€ 20,00

Mixing tubes 

Mixing tubes for both the Araldite 2031 and the 2029-1 epoxy glue's. Sold in packages of 10.

Starter Araldite 2031 epoxy adhesive

Quick view

Order

(0)
In stock
Starter Araldite 2031 epoxy adhesive

Starter Araldite 2031 epoxy adhesive

(0)
€ 75,63

Starter Araldite 2031 epoxy adhesive

The Araldite 2031 is a black pasty two-component expoylijm .
Suitable for bonding :     

  • Fiberglass reinforced plastics and -epoxies     
  • Fibre-reinforced polyester and thermoset composites    
  • Ferrous metals, aluminum and copper


Characteristics:     

  • High chemical resistance     
  • Gap filling capacity up to 10mm     
  • Density: 1.3 g / cm³     
  • Shear strength : 24 N / mm²     
  • Peel strength : 4 N / mm²     
  • Viscosity: Thixotropic     
  • Temperature range: -50 ° C to + 80 ° C     
  • Minimum curing time for initial strength : 6 hours for 1 N / mm² at 23 ° C


The starter package includes:     

  • Manual gun for double syringes HP50DS     
  • 5 mixing tubes M50DS     
  • 1 x Araldite 2031, 50 ml of packaging      
  • 5 degreaser tissues
  • 1 sheet Scotch-Brite Red ( very fine )

Adhesives

Carbon Webshop has selected a versatile set of adhesives for you that can be used in bonding composites and metals.

With these two-component epoxy adhesives you can make incredibly strong and dynamically resilient connections. Epoxy adhesives generally have a relatively high inherent strength, are resistant to oils and solvents, and show relatively little shrinkage when cured. With these adhesives strong, high-load joints can be made; replacing traditional fasteners such as rivets and screws. 
If two parts are connected with an epoxy glue, we define that as a structural connection.

A data sheet with specific properties is added to each glue. In addition to individual tubes, you can also buy a starter set with all the necessary materials for gluing.


This site uses cookies to keep statistics , we do not store any personal information.