Extension 2-way Carbon connector fitting on the Round Carbon High Performance Tube 30mm outer diameter and 27mm inner diameter. The outer layer of these connectors is "twill" fabric. 

With RefiFLEX ® we offer engineers and constructors a flexible and simple method for making lightweight frames and constructions where rigidity is essential.
By using glued carbon connectors, heavy aluminium or plastic couplings with mechanical connections are unnecessary. The carbon composite materials are stainless and resistant to many chemical substances.

All our composite tubes and connectors are produced under strict specification with High Strength carbon fibres and epoxy resins.
The Carbon Fibre structure of the tubes and connectors is precision-determined. This means that the strength is equal in all directions and is adjusted to the round tube.
However, the user must decide for himself whether the coupling piece and the frame construction are sufficiently strong. After all, every frame has a different composition.

90° angle 2-way Carbon connector fitting on the Round Carbon High Performance Tube 30mm outer diameter and 27mm inner diameter. The outer layer of these connectors is "twill" fabric. 

With RefiFLEX ® we offer engineers and constructors a flexible and simple method for making lightweight frames and constructions where rigidity is essential.
By using glued carbon connectors, heavy aluminium or plastic couplings with mechanical connections are unnecessary. The carbon composite materials are stainless and resistant to many chemical substances.

All our composite tubes and connectors are produced under strict specification with High Strength carbon fibres and epoxy resins.
The Carbon Fibre structure of the tubes and connectors is precision-determined. This means that the strength is equal in all directions and is adjusted to the round tube.
However, the user must decide for himself whether the coupling piece and the frame construction are sufficiently strong. After all, every frame has a different composition.

Level 3-way Carbon connector fitting on the Round Carbon High Performance Tube 30mm outer diameter and 27mm inner diameter. The outer layer of these connectors is "twill" fabric. 

With RefiFLEX ® we offer engineers and constructors a flexible and simple method for making lightweight frames and constructions where rigidity is essential.
By using glued carbon connectors, heavy aluminium or plastic couplings with mechanical connections are unnecessary. The carbon composite materials are stainless and resistant to many chemical substances.

All our composite tubes and connectors are produced under strict specification with High Strength carbon fibres and epoxy resins.
The Carbon Fibre structure of the tubes and connectors is precision-determined. This means that the strength is equal in all directions and is adjusted to the round tube.
However, the user must decide for himself whether the coupling piece and the frame construction are sufficiently strong. After all, every frame has a different composition.

3-dimensional 3-way Carbon connector fitting on the Round Carbon High Performance Tube 30mm outer diameter and 27mm inner diameter. The outer layer of these connectors is "twill" fabric. 

With RefiFLEX ® we offer engineers and constructors a flexible and simple method for making lightweight frames and constructions where rigidity is essential.
By using glued carbon connectors, heavy aluminium or plastic couplings with mechanical connections are unnecessary. The carbon composite materials are stainless and resistant to many chemical substances.

All our composite tubes and connectors are produced under strict specification with High Strength carbon fibres and epoxy resins.
The Carbon Fibre structure of the tubes and connectors is precision-determined. This means that the strength is equal in all directions and is adjusted to the round tube.
However, the user must decide for himself whether the coupling piece and the frame construction are sufficiently strong. After all, every frame has a different composition.

Cross-shaped 4-way Carbon connector fitting on the Round Carbon High Performance Tube 30mm outer diameter and 27mm inner diameter. The outer layer of these connectors is "twill" fabric. 

With RefiFLEX ® we offer engineers and constructors a flexible and simple method for making lightweight frames and constructions where rigidity is essential.
By using glued carbon connectors, heavy aluminium or plastic couplings with mechanical connections are unnecessary. The carbon composite materials are stainless and resistant to many chemical substances.

All our composite tubes and connectors are produced under strict specification with High Strength carbon fibres and epoxy resins.
The Carbon Fibre structure of the tubes and connectors is precision-determined. This means that the strength is equal in all directions and is adjusted to the round tube.
However, the user must decide for himself whether the coupling piece and the frame construction are sufficiently strong. After all, every frame has a different composition.

3-dimensional 4-way Carbon connector fitting on the Round Carbon High Performance Tube 30mm outer diameter and 27mm inner diameter. The outer layer of these connectors is "twill" fabric. 

With RefiFLEX ® we offer engineers and constructors a flexible and simple method for making lightweight frames and constructions where rigidity is essential.
By using glued carbon connectors, heavy aluminium or plastic couplings with mechanical connections are unnecessary. The carbon composite materials are stainless and resistant to many chemical substances.

All our composite tubes and connectors are produced under strict specification with High Strength carbon fibres and epoxy resins.
The Carbon Fibre structure of the tubes and connectors is precision-determined. This means that the strength is equal in all directions and is adjusted to the round tube.
However, the user must decide for himself whether the coupling piece and the frame construction are sufficiently strong. After all, every frame has a different composition.

High Performance lightweight carbon tube. The outer layer is a "twill" fabric and is finished with a UV protective high gloss coating. This ensures the tube has optimal strength and stiffness, and low weight. Available in lengths of 1000 and 2000 mm. The outer diameter has a tolerance of +/- 0.2 mm. These tubes offer the same excellent mechanical properties as the High Precision tubes.
 
The carbon tubes are used for Lightweight frames for machine building. Arms and grippers for robots and various fast-moving product handling systems, UAVs, drones, lightweight constructions, tube connections for model building, instruments, medical equipment, yacht building and more. 

The carbon tubes can be cut to size on request. We can also provide post-processing such as drilling and CNC milling.

High Performance lightweight carbon tube. The outer layer is a "twill" fabric and is finished with a UV protective high gloss coating. This ensures the tube has optimal strength and stiffness, and low weight. Available in lengths of 1000 and 2000 mm. The outer diameter has a tolerance of +/- 0.2 mm. These tubes offer the same excellent mechanical properties as the High Precision tubes.
 
The carbon tubes are used for Lightweight frames for machine building. Arms and grippers for robots and various fast-moving product handling systems, UAVs, drones, lightweight constructions, tube connections for model building, instruments, medical equipment, yacht building and more. 

The carbon tubes can be cut to size on request. We can also provide post-processing such as drilling and CNC milling.

The Araldite 2031 is a black epoxy glue - two components

Suitable for:

• Fibreglass reinforced plastics

• Fiberglass reinforced epoxies

• Fibre-reinforced polyester

• Thermosetting composites

Properties:

• High chemical resistance 

• Gap filling capacity till 10 mm

• Color: black

• 1,3 g/cm³

• Shear strength in combination with carbon: 8 N/mm²

• Peel strength: 4 N/mm

• Viscosity: thixotropic

• Temperature resistance: -50°C till +80°C

• Minimal hardening time for initial strength: 6 hours for 1 N/mm² at 23°C 

Starter Araldite 2031 epoxy adhesive

The Araldite 2031 is a black pasty two-component expoylijm .
Suitable for bonding :     

• Fiberglass reinforced plastics and -epoxies     
• Fibre-reinforced polyester and thermoset composites    
• Ferrous metals, aluminum and copper

Characteristics:     

• High chemical resistance     
• Gap filling capacity up to 10mm     
• Density: 1.3 g / cm³     
• Shear strength : 24 N / mm²     
• Peel strength : 4 N / mm²     
• Viscosity: Thixotropic     
• Temperature range: -50 ° C to + 80 ° C     
• Minimum curing time for initial strength : 6 hours for 1 N / mm² at 23 ° C

The starter package includes:     

• Manual gun for double syringes HP50DS     
• 5 mixing tubes M50DS     
• 1 x Araldite 2031, 50 ml of packaging      
• 5 degreaser tissues
• 1 sheet Scotch-Brite Red ( very fine )