There are no products in your shopping cart yet.
RefiFLEX ® 40S carbon connectors 40x40mm

Loading...

RefiFLEX ® 40S 2-way carbon connector/extension
Extension 2-way Carbon connector fitting on the Rectangular Carbon Fibre tubes 40 x 40 mm.
With RefiFLEX ® we offer engineers and constructors a flexible and simple method for making lightweight frames and constructions where rigidity is essential.
By using glued carbon connectors, heavy aluminium or plastic couplings with mechanical connections are unnecessary. The carbon composite materials are stainless and resistant to many chemical substances.
All our composite rectangular tubes and connectors are produced under strict specification with High Strength carbon fibres and epoxy resins.
The Carbon Fibre structure of the rectangular tubes and connectors is precision-determined. This means that the strength is equal in all directions and is adjusted to the rectangular tube.
However, the user must decide for himself whether the coupling piece and the frame construction are sufficiently strong. After all, every frame has a different composition.



RefiFLEX ® 40S 2-way carbon connector with 90° angle
90° angle 2-way Carbon connector fitting on the Rectangular Carbon Fibre tubes 40 x 40 mm.
With RefiFLEX ® we offer engineers and constructors a flexible and simple method for making lightweight frames and constructions where rigidity is essential.
By using glued carbon connectors, heavy aluminium or plastic couplings with mechanical connections are unnecessary. The carbon composite materials are stainless and resistant to many chemical substances.
All our composite rectangular tubes and connectors are produced under strict specification with High Strength carbon fibres and epoxy resins.
The Carbon Fibre structure of the rectangular tubes and connectors is precision-determined. This means that the strength is equal in all directions and is adjusted to the rectangular tube.
However, the user must decide for himself whether the coupling piece and the frame construction are sufficiently strong. After all, every frame has a different composition.



RefiFLEX ® 40S Level 3-way carbon connector
Level 3-way Carbon connector fitting on the Rectangular Carbon Fibre tubes 40 x 40 mm.
With RefiFLEX ® we offer engineers and constructors a flexible and simple method for making lightweight frames and constructions where rigidity is essential.
By using glued carbon connectors, heavy aluminium or plastic couplings with mechanical connections are unnecessary. The carbon composite materials are stainless and resistant to many chemical substances.
All our composite rectangular tubes and connectors are produced under strict specification with High Strength carbon fibres and epoxy resins.
The Carbon Fibre structure of the rectangular tubes and connectors is precision-determined. This means that the strength is equal in all directions and is adjusted to the rectangular tube.
However, the user must decide for himself whether the coupling piece and the frame construction are sufficiently strong. After all, every frame has a different composition.



RefiFLEX ® 40S 3D 3-way carbon connector
3-dimensional 3-way Carbon connector fitting on the Rectangular Carbon Fibre tubes 40 x 40 mm.
With RefiFLEX ® we offer engineers and constructors a flexible and simple method for making lightweight frames and constructions where rigidity is essential.
By using glued carbon connectors, heavy aluminium or plastic couplings with mechanical connections are unnecessary. The carbon composite materials are stainless and resistant to many chemical substances.
All our composite rectangular tubes and connectors are produced under strict specification with High Strength carbon fibres and epoxy resins.
The Carbon Fibre structure of the rectangular tubes and connectors is precision-determined. This means that the strength is equal in all directions and is adjusted to the rectangular tube.
However, the user must decide for himself whether the coupling piece and the frame construction are sufficiently strong. After all, every frame has a different composition.



RefiFLEX ® 40S 4-way cross-shaped carbon connector
Cross-shaped 4-way Carbon connector fitting on the Rectangular Carbon Fibre tubes 40 x 40 mm.
With RefiFLEX ® we offer engineers and constructors a flexible and simple method for making lightweight frames and constructions where rigidity is essential.
By using glued carbon connectors, heavy aluminium or plastic couplings with mechanical connections are unnecessary. The carbon composite materials are stainless and resistant to many chemical substances.
All our composite rectangular tubes and connectors are produced under strict specification with High Strength carbon fibres and epoxy resins.
The Carbon Fibre structure of the rectangular tubes and connectors is precision-determined. This means that the strength is equal in all directions and is adjusted to the rectangular tube.
However, the user must decide for himself whether the coupling piece and the frame construction are sufficiently strong. After all, every frame has a different composition.



RefiFLEX ® 40S 3D 4-way carbon connector
3-dimensional 4-way Carbon connector fitting on the Rectangular Carbon Fibre tubes 40 x 40 mm.
With RefiFLEX ® we offer engineers and constructors a flexible and simple method for making lightweight frames and constructions where rigidity is essential.
By using glued carbon connectors, heavy aluminium or plastic couplings with mechanical connections are unnecessary. The carbon composite materials are stainless and resistant to many chemical substances.
All our composite rectangular tubes and connectors are produced under strict specification with High Strength carbon fibres and epoxy resins.
The Carbon Fibre structure of the rectangular tubes and connectors is precision-determined. This means that the strength is equal in all directions and is adjusted to the rectangular tube.
However, the user must decide for himself whether the coupling piece and the frame construction are sufficiently strong. After all, every frame has a different composition.

Carbon High Precision tube 40x40x1600mm Twill
The tubes are made of High Strength Carbon fibres and epoxy resin. The outside has a nice "twill" weave, whereby the carbon fibres are woven in different angles, which gives the tubes great strength and stiffness at a minimum weight. When it comes to flexing, these carbon tubes perform much better than metal ones.
The carbon tubes have been developed to be combined with RefiFLEX® 40S connectors. The tubes are often used in lightweight and rigid frames for mechanical engineering and product handling systems, as well as structures requiring minimal flexing and weight. Other uses include medical equipment and special automotive applications.
The square carbon tubes can be cut to size on request. We can also provide post-processing such as drilling and CNC milling.




Epoxy glue Araldite 2031 50ml
The Araldite 2031 is a black epoxy glue - two components
Suitable for:
-
Fibreglass reinforced plastics
-
Fiberglass reinforced epoxies
-
Fibre-reinforced polyester
-
Thermosetting composites
Properties:
-
High chemical resistance
-
Gap filling capacity till 10 mm
-
Color: black
-
1,3 g/cm³
-
Shear strength in combination with carbon: 8 N/mm²
-
Peel strength: 4 N/mm
-
Viscosity: thixotropic
-
Temperature resistance: -50°C till +80°C
-
Minimal hardening time for initial strength: 6 hours for 1 N/mm² at 23°C



Starter Araldite 2031 epoxy adhesive
Starter Araldite 2031 epoxy adhesive
The Araldite 2031 is a black pasty two-component expoylijm .
Suitable for bonding :
- Fiberglass reinforced plastics and -epoxies
- Fibre-reinforced polyester and thermoset composites
- Ferrous metals, aluminum and copper
Characteristics:
- High chemical resistance
- Gap filling capacity up to 10mm
- Density: 1.3 g / cm³
- Shear strength : 24 N / mm²
- Peel strength : 4 N / mm²
- Viscosity: Thixotropic
- Temperature range: -50 ° C to + 80 ° C
- Minimum curing time for initial strength : 6 hours for 1 N / mm² at 23 ° C
The starter package includes:
- Manual gun for double syringes HP50DS
- 5 mixing tubes M50DS
- 1 x Araldite 2031, 50 ml of packaging
- 5 degreaser tissues
- 1 sheet Scotch-Brite Red ( very fine )
RefiFLEX ® 40S is a unique construction system of full carbon fibre connectors for 40 mm rectangular carbon tubes. Gluing the carbon connection pieces with the 40 mm tubes creates a 100% carbon fibre epoxy construction, extremely low in weight, optimally stiff and strong. By using carbon connectors, heavy aluminium or plastic couplings with mechanical connections are unnecessary.
With RefiFLEX ® we offer engineers and constructors a simple method for making lightweight frames and constructions where rigidity is essential.
The RefiFLEX ® 40S construction system includes:
- Rectangular Carbon Fibre Connectors 40 mm with various corner connections
- 40 mm carbon tubes of 1150 mm or 2300 mm with a wall thickness of 1.5 mm
- Special adhesive for an optimal connection
- Protective equipment and auxiliary materials
- Extensive instructions
- Product specifications