info

You have reached the minimum number

Shopping cart (0)

There are no products in your shopping cart yet.

Carbon connectors



Loading...
2-way carbon connector/extension

Quick view

Order

(0)
In stock
2-way carbon connector/extension

2-way carbon connector/extension

(0)
€ 54,45

We use high-quality, first-class prepregs based on epoxy resins to manufacture our lightweight carbon connectors. The even distribution of fibre directions in our materials means you can be sure of a balanced performance. Make sure you assess and test your construction for stiffness, strength and functionality, as every application has unique properties.
 

Adhesives
The best adhesive for our connectors is 2-component epoxy glue. At Carbon Webshop, we recommend Araldite 2029-1, an adhesive that flows evenly into the glue chambers.
 
To order adhesives, please go to the ‘Adhesives’ page on this website.
 

Density: 1,6 gr/cm³
Weight: 40 gram
Surface finish: Smooth outside and rough inside
Fiber direction: Distributed evenly

Carbon I-coupling part

Quick view

Order

(0)
In stock
Carbon I-coupling part

Carbon I-coupling part

(0)
€ 56,19

 
We use high-quality, first-class prepregs based on epoxy resins to manufacture our lightweight carbon connectors. The even distribution of fibre directions in our materials means you can be sure of a balanced performance. Make sure you assess and test your construction for stiffness, strength and functionality, as every application has unique properties.

Carbon square tubes have a smooth exterior finish and a rough inside. When bonding parts into the tube, always rub off folds and uneven parts. It happens that the connectors only fit into the tube after sanding. We therefore advise you to use the largest possible sanding surface and try to prevent damage.
 
Adhesives
The best adhesive for our connectors is 2-component epoxy glue. At Carbon Webshop, we recommend Araldite 2031.
 
To order adhesives, please go to the ‘Adhesives’ page on this website.

Density: 1,6 gr/cm³
Weight: 18 gram
Surface finish: Smooth outside and rough inside
Fiber direction: Distributed evenly

For additional technical information please refer to the technical drawing in the attachment.

Carbon coupling part double angle

Quick view

Order

(0)
In stock
Carbon coupling part double angle

Carbon coupling part double angle

(0)
€ 61,42

 We use high-quality, first-class prepregs based on epoxy resins to manufacture our lightweight carbon connectors. The even distribution of fibre directions in our materials means you can be sure of a balanced performance. Make sure you assess and test your construction for stiffness, strength and functionality, as every application has unique properties.

Carbon square tubes have a smooth exterior finish and a rough inside. When bonding parts into the tube, always rub off folds and uneven parts. It happens that the connectors only fit into the tube after sanding. We therefore advise you to use the largest possible sanding surface and try to prevent damage.

Adhesives
The best adhesive for our connectors is 2-component epoxy glue. At Carbon Webshop, we recommend Araldite 2031.
 
To order adhesives, please go to the ‘Adhesives’ page on this website.

Density: 1,6 gr/cm³
Weight: 26 gram
Surface finish: Smooth outside and rough inside
Fiber direction: Distributed evenly

For additional technical information please refer to the technical drawing in the attachment.

3D 3-way carbon connector

Quick view

Order

(0)
In stock
3D 3-way carbon connector

3D 3-way carbon connector

(0)
€ 62,92

We use high-quality, first-class prepregs based on epoxy resins to manufacture our lightweight carbon connectors. The even distribution of fibre directions in our materials means you can be sure of a balanced performance. Make sure you assess and test your construction for stiffness, strength and functionality, as every application has unique properties.
 

Adhesives
The best adhesive for our connectors is 2-component epoxy glue. At Carbon Webshop, we recommend Araldite 2029-1, an adhesive that flows evenly into the glue chambers.
 
To order adhesives, please go to the ‘Adhesives’ page on this website.
 
Density: 1,6 gr/cm³
Weight: 40 gram
Surface finish: Smooth outside and rough inside
Fiber direction: Distributed evenly

Carbon connector 3D angle

Quick view

Order

(1)
In stock
Carbon connector 3D angle

Carbon connector 3D angle

(1)
€ 64,80

We use high-quality, first-class prepregs based on epoxy resins to manufacture our lightweight carbon connectors. The even distribution of fibre directions in our materials means you can be sure of a balanced performance. Make sure you assess and test your construction for stiffness, strength and functionality, as every application has unique properties.

Carbon square tubes have a smooth exterior finish and a rough inside. When bonding parts into the tube, always rub off folds and uneven parts. It happens that the connectors only fit into the tube after sanding. We therefore advise you to use the largest possible sanding surface and try to prevent damage.
 
Adhesives
The best adhesive for our connectors is 2-component epoxy glue. At Carbon Webshop, we recommend Araldite 2031.
 
To order adhesives, please go to the ‘Adhesives’ page on this website.

Density: 1,6 gr/cm³
Weight: 40 gram
Surface finish: Smooth outside and rough inside
Fiber direction: Distributed evenly

For additional technical information please refer to the technical drawing in the attachment.

3D 4-way carbon connector

Quick view

Order

(0)
In stock
3D 4-way carbon connector

3D 4-way carbon connector

(0)
€ 67,76

We use high-quality, first-class prepregs based on epoxy resins to manufacture our lightweight carbon connectors. The even distribution of fibre directions in our materials means you can be sure of a balanced performance. Make sure you assess and test your construction for stiffness, strength and functionality, as every application has unique properties.
 

Adhesives
The best adhesive for our connectors is 2-component epoxy glue. At Carbon Webshop, we recommend Araldite 2029-1, an adhesive that flows evenly into the glue chambers.
 
To order adhesives, please go to the ‘Adhesives’ page on this website.
 

Density: 1,6 gr/cm³
Weight: 50 gram
Surface finish: Smooth outside and rough inside
Fiber direction: Distributed evenly

Carbon coupling 3D angle

Quick view

Order

(0)
In stock
Carbon coupling 3D angle

Carbon coupling 3D angle

(0)
€ 68,41

 We use high-quality, first-class prepregs based on epoxy resins to manufacture our lightweight carbon connectors. The even distribution of fibre directions in our materials means you can be sure of a balanced performance. Make sure you assess and test your construction for stiffness, strength and functionality, as every application has unique properties.

Carbon square tubes have a smooth exterior finish and a rough inside. When bonding parts into the tube, always rub off folds and uneven parts. It happens that the connectors only fit into the tube after sanding. We therefore advise you to use the largest possible sanding surface and try to prevent damage.

 
Adhesives
The best adhesive for our connectors is 2-component epoxy glue. At Carbon Webshop, we recommend Araldite 2031.
 
To order adhesives, please go to the ‘Adhesives’ page on this website.

Density: 1,6 gr/cm³
Weight: 40 gram
Surface finish: Smooth outside and rough inside
Fiber direction: Distributed evenly

For additional technical information please refer to the technical drawing in the attachment.
 

2-way carbon connector with 90° angle

Quick view

Order

(0)
In stock
2-way carbon connector with 90° angle

2-way carbon connector with 90° angle

(0)
€ 54,45

Our lightweight carbon connectors are manufactured with high-quality, first-class prepregs based on epoxy resins. To ensure balanced performance, we make sure the fibre directions are evenly distributed. Please do assess and test your construction for stiffness, strength and functionality, as every application has its own unique properties.
 
Adhesive
The best adhesive for our connectors is 2-component epoxy glue. At Carbon Webshop, we recommend Araldite 2029, an adhesive that flows evenly into the glue chambers.
 
To order adhesive, please go to the ‘Accessories ’ page on this website.
 
Weight:               29 gr
Density:              1,6 gr/cm3
Surface finish:   Smooth outside, rough inside

Carbon coupling part angle

Quick view

Order

(0)
In stock
Carbon coupling part angle

Carbon coupling part angle

(0)
€ 56,19

 
We use high-quality, first-class prepregs based on epoxy resins to manufacture our lightweight carbon connectors. The even distribution of fibre directions in our materials means you can be sure of a balanced performance. Make sure you assess and test your construction for stiffness, strength and functionality, as every application has unique properties.

Carbon square tubes have a smooth exterior finish and a rough inside. When bonding parts into the tube, always rub off folds and uneven parts. It happens that the connectors only fit into the tube after sanding. We therefore advise you to use the largest possible sanding surface and try to prevent damage. 

Adhesives
The best adhesive for our connectors is 2-component epoxy glue. At Carbon Webshop, we recommend Araldite 2031.
 
To order adhesives, please go to the ‘Adhesives’ page on this website.

Density: 1,6 gr/cm³
Weight: 18 gram
Surface finish: Smooth outside and rough inside
Fiber direction: Distributed evenly

For additional technical information please refer to the technical drawing in the attachment.

Carbon coupling circle connector

Quick view

Order

(0)
In stock
Carbon coupling circle connector

Carbon coupling circle connector

(0)
€ 98,00

 
We use high-quality, first-class prepregs based on epoxy resins to manufacture our lightweight carbon connectors. The even distribution of fibre directions in our materials means you can be sure of a balanced performance. Make sure you assess and test your construction for stiffness, strength and functionality, as every application has unique properties.

Carbon square tubes have a smooth exterior finish and a rough inside. When bonding parts into the tube, always rub off folds and uneven parts. It happens that the connectors only fit into the tube after sanding. We therefore advise you to use the largest possible sanding surface and try to prevent damage. 

Adhesives
The best adhesive for our connectors is 2-component epoxy glue. At Carbon Webshop, we recommend Araldite 2031.
 
To order adhesives, please go to the ‘Adhesives’ page on this website.

Density: 1,6 gr/cm³
Weight: 18 gram
Surface finish: Smooth outside and rough inside
Fiber direction: Distributed evenly

For additional technical information please refer to the technical drawing in the attachment.

4-way cross-shaped carbon connector

Quick view

Order

(0)
In stock
4-way cross-shaped carbon connector

4-way cross-shaped carbon connector

(0)
€ 62,92

We use high-quality, first-class prepregs based on epoxy resins to manufacture our lightweight carbon connectors. The even distribution of fibre directions in our materials means you can be sure of a balanced performance. Make sure you assess and test your construction for stiffness, strength and functionality, as every application has unique properties.
 

Adhesives
The best adhesive for our connectors is 2-component epoxy glue. At Carbon Webshop, we recommend Araldite 2029-1, an adhesive that flows evenly into the glue chambers.
 
To order adhesives, please go to the ‘Adhesives’ page on this website.
 

Density: 1,6 gr/cm³
Weight: 52 gram
Surface finish: Smooth outside and rough inside
Fiber direction: Distributed evenly

Carbon coupling part cross

Quick view

Order

(0)
In stock
Carbon coupling part cross

Carbon coupling part cross

(0)
€ 64,80

 We use high-quality, first-class prepregs based on epoxy resins to manufacture our lightweight carbon connectors. The even distribution of fibre directions in our materials means you can be sure of a balanced performance. Make sure you assess and test your construction for stiffness, strength and functionality, as every application has unique properties.

Carbon square tubes have a smooth exterior finish and a rough inside. When bonding parts into the tube, always rub off folds and uneven parts. It happens that the connectors only fit into the tube after sanding. We therefore advise you to use the largest possible sanding surface and try to prevent damage.

Adhesives
The best adhesive for our connectors is 2-component epoxy glue. At Carbon Webshop, we recommend Araldite 2031.
 
To order adhesives, please go to the ‘Adhesives’ page on this website.

Density: 1,6 gr/cm³
Weight: 26 gram
Surface finish: Smooth outside and rough inside
Fiber direction: Distributed evenly

For additional technical information please refer to the technical drawing in the attachment.
 

Build your own lightweight carbon constructions


Do you want to build your own lightweight constructions? With our easy-fit round and square carbon fibre connectors, you can. Combining the connectors with our 25 mm square and 30 mm round carbon tubes offers you endless construction possibilities.
 
Advantages over conventional materials
Demand for alternative materials for building frames and systems – other than aluminium, for example – is rising. You’ll find that using carbon fibres offers many advantages over conventional materials:
 
  • Lighter
  • Higher chemical resistance
  • Better thermal insulation
  • Greater thermal stability
  • Material decomposition or oxidation
 
Advantages for your construction
The use of carbon fibre will positively impact your construction in numerous ways, for example:
 
  • Increased processing speed
  • Reduced deflection, higher precision
  • Higher measurement accuracy due to construction stiffness and dimensional stability
  • Longer lifecycle (greater durability)
  • No worries about oxidation or degradation

Our connector types and services


At the Carbon Webshop, we produce six different types of round and square carbon connectors. All these can be joined with 2-component epoxy adhesive. On request, we can also deliver various tailored compositions. We will provide whatever materials and services you need on the basis of a pre-agreed price. Our additional services include:
 
  • CNC milling
  • Bonding or full assembly of your frame or construction
 

Examples of constructions and applications realised with Refitech

  • Extractors for plastic injection moulding machines
  • Extendable carbon telescopes
  • Robot grippers for product handling
  • Push-pull rods
  • Frames and components for UAVs and drones
  • Measurement and test rigs for laboratories


Filter
This site uses cookies to keep statistics , we do not store any personal information.